Product Introduction:

Honeycomb Activated Carbon Has A Large Specific Surface Area, Microporous Structure, High Adsorption Capacity, High Surface Activated Carbon Products, Widely Used In Air Pollution Control. The Selection Of Quanxin Water Purification Materials Co., Ltd. - Supplier Of Quanxin Water Purification Production Of Honeycomb Activated Carbon Adsorption Method, That Is, The Waste Gas And Porous Activated Carbon With A Large Surface Contact, The Pollutants In The Waste Gas Are Adsorbed And Decomposed, So As To Play A Purification Role. The Pollutants That Can Be Removed With Honeycomb Activated Carbon In Different Degrees Are: Nitrogen Oxide, Carbon Tetrachloride, Chlorine, Benzene, Diformaldehyde, Acetone, Ethanol, Ether, Methanol, Acetic Acid, Ethyl Ester, Styrene, Phosgene, Odor Gas, Etc. The Modified Honeycomb Activated Carbon After Impregnation With Chemical Reagents Can Remove: Acid Fog, Alkali Fog, Amine, Mercaptan, Sulfur Dichloride, Hydrogen Sulfide, Ammonia, Mercury, Carbon Chloride, Dioxins, Etc.

Honeycomb Activated Carbon Type Performance Use:

The Main Component Of Honeycomb Activated Carbon Is Activated Carbon, Normal Compressive Strength Greater Than 0.8mpa Common Specifications 50*50*100mm, 100*100*100mm Operating Temperature Less Than 400 Degrees Celsius Hole Density 100 Holes/Square Inch, 150 Holes/Square Inch Empty Tower Wind Speed 0.8 M/S Specific Surface Area Greater Than 700 Square/G Appearance Product Surface Flat, No Crack Note: Other Specifications Can Be Produced According To User Requirements.

Honeycomb Activated Carbon Is Divided Into Two Kinds, Water Resistance And Water Resistance, All Index Parameters Are The Same, The Size Can Be Produced According To Customer Requirements, Conventional 100*100*100mm,50*50*100mm. Honeycomb Activated Carbon Is Widely Used In Various Organic Waste Gas Purification Systems With Low Concentration And Large Air Volume.

The Best Way To Control Air Pollution Is To Use Honeycomb Activated Carbon, Which Is Composed Of Two Adsorbers In Parallel, Which Can Be Used To Deal With Intermittent Exhaust, And Can Be Used For Continuous Exhaust, One Of Which Is Adsorbed, And The Other Adsorber Is Desorbed And Regenerated, And The Desorbed Pollutants Are Discharged After Catalytic Combustion. The Use Of Honeycomb Activated Carbon Should Try To Avoid High Temperature, Because High Temperature Will Reduce The Adsorption Amount, And The Adsorption Effect Will Decrease As The Temperature Rises. At The Same Time, The High Dust Content In The Gas Should Be Avoided, Because The Tar Dust Fog Will Block The Activated Carbon Pores, Increase The Wind Resistance, And Reduce The Adsorption Effect, In This Case, The Dust Filter Device Should Be Installed In Front Of The Honeycomb Activated Carbon To Improve The Service Life.

The Treated Waste Gas Can Fully Contact The Activated Carbon When Passing Through The Honeycomb Activated Carbon Square Hole, The Adsorption Efficiency Can Reach 67.16%, The Wind Resistance Coefficient Is Small, Has Excellent Adsorption, Desorption Properties And Gas Dynamics Properties, And Can Be Widely Used In The Purification Treatment Containing Toluene. Xylene, Benzene, Isobenzenes, Phenols, Lipids, Alcohols, Aldehydes And Other Organic Gases, Odor Gases And Various Gases Containing Trace Metals. The Environmental Protection Equipment Using Honeycomb Activated Carbon Has High Exhaust Gas Treatment And Purification Efficiency, Small Adsorption Bed Volume, Low Energy Consumption Of The Equipment, And Can Reduce The Cost And Operating Costs, And The Purified Gas Fully Meets The Environmental Protection Emission Requirements.

Use Of Honeycomb Activated Carbon: Food, Chemical, Industrial Exhaust Gas Treatment, Airports, Shipyards, Electronics Industry, Automobile Factory, Pharmaceutical, Medical, Industrial Buildings, Large Theaters And Other Public Ventilation Equipment Used In The Exhaust Gas Treatment.

Honeycomb Activated Carbon Technical Parameters: